BuildMyMTB
Prototype - Evolving Daily

e*thirteen e*spec Plus Alloy Cranks (Shimano EP8, 165mm) Cranks

Cranks: Crank interface shimano-ep8; Arm length 165 mm. 1 verified variant.

What the checker says4will not fit

Run variant by variant through the e-MTB builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.

Checked against 495 verified e-MTB parts in this catalog. 491 produced no finding of any kind.

Will not fit

  • Will not fiterror · Motor / Drive unitCranks do not fit this motor: e*thirteen e*spec Plus Alloy Cranks (Shimano EP8, 165mm) is a shimano-ep8-spline crank and Bosch Performance Line CX (BDU374Y) has a isis spindle. E-MTB cranks bolt straight to the drive unit spindle, so the spline standard must match. On 1 of the 6 verified motor / drive units in this catalog.
  • Will not fiterror · Motor / Drive unitCranks do not fit this motor: e*thirteen e*spec Plus Alloy Cranks (Shimano EP8, 165mm) is a shimano-ep8-spline crank and Bosch Performance Line CX (BDU384Y) has a isis spindle. E-MTB cranks bolt straight to the drive unit spindle, so the spline standard must match. On 1 of the 6 verified motor / drive units in this catalog.
  • Will not fiterror · Motor / Drive unitCranks do not fit this motor: e*thirteen e*spec Plus Alloy Cranks (Shimano EP8, 165mm) is a shimano-ep8-spline crank and Fazua RIDE 60 Drive Unit has a etor spindle. E-MTB cranks bolt straight to the drive unit spindle, so the spline standard must match. On 1 of the 6 verified motor / drive units in this catalog.
  • Will not fiterror · Motor / Drive unitCranks do not fit this motor: e*thirteen e*spec Plus Alloy Cranks (Shimano EP8, 165mm) is a shimano-ep8-spline crank and TQ HPR50 Drive Unit has a isis spindle. E-MTB cranks bolt straight to the drive unit spindle, so the spline standard must match. On 1 of the 6 verified motor / drive units in this catalog.
The checker compares the dimensions listed in what we check, and what we don’t. “No conflicts found” means no conflict among those dimensions — not a guarantee that a build works. Errors mean it won’t fit; warnings mean it works but check; infos are notes.

$78.95 MSRP

What the maker states

Crank interface
Shimano-ep8
Arm length
165 mm
The rest of what the maker states1 not published

1 further field the checker looks for is not published by e*thirteen, so we leave it blank rather than estimate it, and that check stays silent on this cranks. It is ring. Each is recorded as “not stated by the maker (not checked)”.

Source: the maker’s page. Last checked 2026-08-04.

Checked against

The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.

6 of 265 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.

Where this sits

All e*thirteen cranksOpen a variant in the builder to see the ones that apply to your own parts