BuildMyMTB
Prototype - Evolving Daily

Title FORM Aluminum Handlebar

What the checker says8will not fit

Run variant by variant through the e-MTB builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.

Checked against 497 verified e-MTB parts in this catalog. 490 produced no finding of any kind; that is FORM Aluminum 35. FORM Aluminum 31.8 clears 485. Each variant produces 1 to 7 distinct errors and 0 distinct warnings.

Will not fit

  • Will not fiterror · StemBar/stem clamp mismatch: a 31.8mm bar does not clamp in a 35mm stem - the clamp diameters differ. A shim or adapter may make other sizes or standards work, but that is a modification, not a fit. On 12 of the 19 verified stems in this catalog. Applies to 1 of 2 variants.
  • Will not fiterror · StemBar/stem clamp mismatch: Title FORM Aluminum 35 has a 35mm clamp and Deity Intake DM Stem 31.8mm 50mm has a 31.8mm clamp. On 1 of the 19 verified stems in this catalog. Applies to 1 of 2 variants.
  • Will not fiterror · StemBar/stem clamp mismatch: Title FORM Aluminum 35 has a 35mm clamp and Spank Spike 25/30 DM Stem has a 31.8mm clamp. On 1 of the 19 verified stems in this catalog. Applies to 1 of 2 variants.
  • Will not fiterror · StemBar/stem clamp mismatch: Title FORM Aluminum 35 has a 35mm clamp and Spank Spike Race 2 Stem 35mm has a 31.8mm clamp. On 1 of the 19 verified stems in this catalog. Applies to 1 of 2 variants.
  • Will not fiterror · StemBar/stem clamp mismatch: Title FORM Aluminum 35 has a 35mm clamp and Spank Split Stem 38mm has a 31.8mm clamp. On 1 of the 19 verified stems in this catalog. Applies to 1 of 2 variants.
  • Will not fiterror · StemBar/stem clamp mismatch: Title FORM Aluminum 35 has a 35mm clamp and Spank Spoon 2 Stem 40mm has a 31.8mm clamp. On 1 of the 19 verified stems in this catalog. Applies to 1 of 2 variants.
  • Will not fiterror · StemBar/stem clamp mismatch: Title FORM Aluminum 35 has a 35mm clamp and Title ST1 (31.8mm) has a 31.8mm clamp. On 1 of the 19 verified stems in this catalog. Applies to 1 of 2 variants.
  • Will not fiterror · StemBar/stem clamp mismatch: Title FORM Aluminum 35 has a 35mm clamp and Title ST2 (31.8mm) has a 31.8mm clamp. On 1 of the 19 verified stems in this catalog. Applies to 1 of 2 variants.
The checker compares the dimensions listed in what we check, and what we don’t. “No conflicts found” means no conflict among those dimensions — not a guarantee that a build works. Errors mean it won’t fit; warnings mean it works but check; infos are notes.
Title FORM Aluminum 35
Photo: Title

$104.95 MSRP·368 to 376 g

What the maker states

Clamp
Bar clamp 31.8 mm (on 1 of 2 variants); Bar clamp 35 mm (on 1 of 2 variants)
Width
800 mm
Rise
25 mm

A value shown as a set or a range differs between this model’s variants and is never one variant’s spec.

2 verified variants

VariantClampPrice (MSRP)WeightSourceLast checkedBuild
FORM Aluminum 35Bar clamp 35 mm$104.95376 gmaker’s page2026-09-10Build with this
FORM Aluminum 31.8Bar clamp 31.8 mm$104.95368 gmaker’s page2026-09-10Build with this
Source

Source: each variant links the maker’s own page in the table above. Last checked 2026-09-10.

Checked against

The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.

6 of 263 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.

Where this sits

Previous: Title AH1Next: Title FORM Carbon 35 (25mm rise)All Title handlebarsOpen a variant in the builder to see the ones that apply to your own parts