BuildMyMTB
Prototype - Evolving Daily

PNW Drop Bar Lever Kit Dropper Lever

What the checker says4will not fit

Run variant by variant through the gravel bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.

Checked against 876 verified gravel bike parts in this catalog. 874 produced no finding of any kind. Each variant produces 2 distinct errors and 0 distinct warnings.

Will not fit

  • Will not fiterror · Dropper PostDropper actuation: PNW Drop Bar Lever Kit (24mm) is a cable-actuated remote, but RockShox Reverb AXS XPLR (75mm) is a axs-wireless post - the lever has no cable to pull on that post. A remote built for the post's own actuation (its wireless controller, or its own hydraulic hose) is what pairs with it. On 1 of the 40 verified dropper posts in this catalog. Applies to 1 of 2 variants.
  • Will not fiterror · Dropper PostDropper actuation: PNW Drop Bar Lever Kit (24mm) is a cable-actuated remote, but RockShox Reverb AXS XPLR is a axs-wireless post - the lever has no cable to pull on that post. A remote built for the post's own actuation (its wireless controller, or its own hydraulic hose) is what pairs with it. On 1 of the 40 verified dropper posts in this catalog. Applies to 1 of 2 variants.
  • Will not fiterror · Dropper PostDropper actuation: PNW Drop Bar Lever Kit (31.8mm) is a cable-actuated remote, but RockShox Reverb AXS XPLR (75mm) is a axs-wireless post - the lever has no cable to pull on that post. A remote built for the post's own actuation (its wireless controller, or its own hydraulic hose) is what pairs with it. On 1 of the 40 verified dropper posts in this catalog. Applies to 1 of 2 variants.
  • Will not fiterror · Dropper PostDropper actuation: PNW Drop Bar Lever Kit (31.8mm) is a cable-actuated remote, but RockShox Reverb AXS XPLR is a axs-wireless post - the lever has no cable to pull on that post. A remote built for the post's own actuation (its wireless controller, or its own hydraulic hose) is what pairs with it. On 1 of the 40 verified dropper posts in this catalog. Applies to 1 of 2 variants.
The checker compares the dimensions listed in what we check, and what we don’t. “No conflicts found” means no conflict among those dimensions — not a guarantee that a build works. Errors mean it won’t fit; warnings mean it works but check; infos are notes.
PNW Drop Bar Lever Kit (24mm)
Photo: PNW

$49.00 MSRP

What the maker states

Mount
Handlebar clamp
Actuation
Mechanical
Bar diameter
24 mm (on 1 of 2 variants); 31.8 mm (on 1 of 2 variants)

A value shown as a set or a range differs between this model’s variants and is never one variant’s spec.

2 verified variants

VariantBar diameterPrice (MSRP)WeightSourceLast checkedBuild
Drop Bar Lever Kit (24mm)24 mm$49.00not statedmaker’s page2026-08-21Build with this
Drop Bar Lever Kit (31.8mm)31.8 mm$49.00not statedmaker’s page2026-08-21Build with this
The rest of what the maker states1 not published

1 further field the checker looks for is not published by PNW, so we leave it blank rather than estimate it, and that check stays silent on this dropper lever. It is cable travel. Each is recorded as “not stated by the maker (not checked)”.

Source: each variant links the maker’s own page in the table above. Last checked 2026-08-21.

Checked against

The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.

6 of 516 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.

Where this sits

All PNW dropper leversOpen a variant in the builder to see the ones that apply to your own parts