Chris King ThreadFit 30 Bottom Bracket
What the checker says275will not fit
Run variant by variant through the mountain bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.
Checked against 6134 verified mountain bike parts in this catalog. 5996 produced no finding of any kind; that is ThreadFit 30 (DUB). ThreadFit 30 (native 30mm) clears 5995. Each variant produces 137 to 138 distinct errors and 0 distinct warnings.
Will not fit
- Will not fiterror · CranksetBB spindle mismatch: Chris King ThreadFit 30 (DUB) takes a SRAM DUB spindle but Shimano CUES FC-U6000-1 is 24 mm spindle. On 2 of the 102 verified cranksets in this catalog. Applies to 1 of 2 variants.
- Will not fiterror · CranksetBB spindle mismatch: Chris King ThreadFit 30 (native 30mm) takes a 30 mm spindle spindle but Shimano CUES FC-U6000-1 is 24 mm spindle. On 2 of the 102 verified cranksets in this catalog. Applies to 1 of 2 variants.
Bb spindle, Crankset. 155 more findings from the same check, on up to 1 of the 102 verified cranksets each.
Bb shell, Frame. 118 more findings from the same check, on up to 1 of the 258 verified frames each.
Open a variant in the builder to see the ones that apply to your own parts.
$215.00 MSRP·91 g
What the maker states
- Shell
- Fits a BSA threaded 73 bottom-bracket shell
- Spindle
- Takes a 30 mm spindle crank spindle (on 1 of 2 variants); Takes a SRAM DUB crank spindle (on 1 of 2 variants)
A value shown as a set or a range differs between this model’s variants and is never one variant’s spec.
2 verified variants
| Variant | Spindle | Price (MSRP) | Weight | Source | Last checked | Build |
|---|---|---|---|---|---|---|
| ThreadFit 30 (DUB) | Takes a SRAM DUB crank spindle | $215.00 | 91 g | maker’s page | 2026-07-11 | Build with this |
| ThreadFit 30 (native 30mm) | Takes a 30 mm spindle crank spindle | $215.00 | 91 g | maker’s page | 2026-07-11 | Build with this |
Source
Source: each variant links the maker’s own page in the table above. Last checked 2026-07-11.
Checked against
The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.
- 5DEV R-SPEC Trail/Enduro Cranks (Crankset) Will not fit
- 9point8 Fall Line (Dropper Post) No conflicts found
- 9point8 Stout (31.8, 30mm) (Stem) No conflicts found
- ACID Pro 25 front (Front Wheel) No conflicts found
- ACID Pro 25 rear (Rear Wheel) No conflicts found
- ACID SLX 30 front (Front Wheel) No conflicts found
6 of 1913 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.