Magura MT4 Front Brake
What the checker says2will not fit2check before you buy
Run variant by variant through the mountain bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.
Checked against 6082 verified mountain bike parts in this catalog. 6054 produced no finding of any kind.
Will not fit
- Will not fiterror · Front RotorFront rotor too big for the caliper as recorded here: 220mm is larger than 203mm, the largest rotor size this catalog records for the Magura MT4 caliper. The caliper maker's own rotor chart is the place to check. On 15 of the 177 verified rotors in this catalog.
- Will not fiterror · Front RotorFront rotor too big for the caliper as recorded here: 223mm is larger than 203mm, the largest rotor size this catalog records for the Magura MT4 caliper. The caliper maker's own rotor chart is the place to check. On 5 of the 177 verified rotors in this catalog.
Check before you buy
- Check before you buywarning · Front RotorFront rotor thickness: Magura MT4 is designed for 1.8-2.0mm rotors and this rotor is 2.3mm - check the brake maker's rotor-thickness spec before buying. On 8 of the 177 verified rotors in this catalog.
- Check before you buywarning · Front RotorFront rotor thickness: Magura MT4 is designed for 1.8-2.0mm rotors and this rotor is 2.2mm - check the brake maker's rotor-thickness spec before buying. On 4 of the 177 verified rotors in this catalog.
$85.00 MSRP·230 g
What the maker states
- Mount
- Post mount caliper
- Pistons
- 2-piston caliper
- Maximum rotor
- Rotor up to 203 mm
- Design rotor thickness
- Design rotor thickness: 1.8
- Design rotor thickness maximum
- Design rotor thickness maximum: 2
- Lever accepts
- I-Spec B, I-Spec II, I-Spec EV and MatchMaker X
The rest of what the maker states2 not published
2 further fields the checker looks for are not published by Magura, so we leave them blank rather than estimate them, and those 2 checks stay silent on this front brake. They are excludes rotor and maximum rotor evidence. Each is recorded as “not stated by the maker (not checked)”.
Source: the maker’s page. Last checked 2026-07-16.
Checked against
The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.
- 5DEV R-SPEC Trail/Enduro Cranks (Crankset) No conflicts found
- 9point8 Fall Line (Dropper Post) No conflicts found
- 9point8 Stout (31.8, 30mm) (Stem) No conflicts found
- ACID SLX 30 front (Front Wheel) No conflicts found
- ACID SLX 30 rear (Rear Wheel) No conflicts found
- Acros ZS44/ZS56 (Headset) No conflicts found
6 of 1862 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.