SRAM X-SYNC Chainring 26T Direct Mount (SRAM 3-Bolt, 6mm Offset, 11-Speed) Chainring
What the checker says10will not fit
Run variant by variant through the mountain bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.
Checked against 5882 verified mountain bike parts in this catalog. 5880 produced no finding of any kind. Each variant produces 2 distinct errors and 0 distinct warnings.
Will not fit
Chainring mount, Crankset. 10 more findings from the same check, on up to 1 of the 98 verified cranksets each.
Open a variant in the builder to see the ones that apply to your own parts.
$25.00 MSRP
What the maker states
- Direct mount
- SRAM 3-bolt
- Speeds rated
- Rated for 11-speed
- Teeth
- 28 teeth (on 2 of 5 variants); 26 teeth (on 1 of 5 variants); 30 teeth (on 1 of 5 variants); 32 teeth (on 1 of 5 variants)
- Offset
- 3 mm (on 3 of 5 variants); 6 mm (on 2 of 5 variants)
A value shown as a set or a range differs between this model’s variants and is never one variant’s spec.
5 verified variants
| Variant | Teeth | Offset | Price (MSRP) | Weight | Source | Last checked | Build |
|---|---|---|---|---|---|---|---|
| X-SYNC Chainring 26T Direct Mount (SRAM 3-Bolt, 6mm Offset, 11-Speed) | 26 teeth | 6 mm | $25.00 | not stated | maker’s page | 2026-09-09 | Build with this |
| X-SYNC Chainring 28T Direct Mount (SRAM 3-Bolt, 3mm Boost Offset, 11-Speed) | 28 teeth | 3 mm | $25.00 | not stated | maker’s page | 2026-09-09 | Build with this |
| X-SYNC Chainring 28T Direct Mount (SRAM 3-Bolt, 6mm Offset, 11-Speed) | 28 teeth | 6 mm | $25.00 | not stated | maker’s page | 2026-09-09 | Build with this |
| X-SYNC Chainring 30T Direct Mount (SRAM 3-Bolt, 3mm Boost Offset, Steel, 11-Speed) | 30 teeth | 3 mm | $25.00 | not stated | maker’s page | 2026-09-09 | Build with this |
| X-SYNC Chainring 32T Direct Mount (SRAM 3-Bolt, 3mm Boost Offset, Steel, 11-Speed) | 32 teeth | 3 mm | $25.00 | not stated | maker’s page | 2026-09-09 | Build with this |
The rest of what the maker states3 not published
3 further fields the checker looks for are not published by SRAM, so we leave them blank rather than estimate them, and those 3 checks stay silent on this chainring. They are bcd, bolt count and chainline. Each is recorded as “not stated by the maker (not checked)”.
Source: each variant links the maker’s own page in the table above. Last checked 2026-09-09.
Checked against
The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.
- 5DEV R-SPEC Trail/Enduro Cranks (Crankset) No conflicts found
- 9point8 Fall Line (Dropper Post) No conflicts found
- 9point8 Stout (31.8, 30mm) (Stem) No conflicts found
- ACID SLX 30 front (Front Wheel) No conflicts found
- ACID SLX 30 rear (Rear Wheel) No conflicts found
- Acros ZS44/ZS56 (Headset) No conflicts found
6 of 1858 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.