BuildMyMTB
Prototype - Evolving Daily

Funn Fantom Hub, rear Rear Hub

What the checker says124will not fit531worth knowing

Run variant by variant through the mountain bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.

Checked against 6050 verified mountain bike parts in this catalog. 5813 produced no finding of any kind; that is Fantom Hub, rear (Shimano HG). Fantom Hub, rear (Shimano Micro Spline) clears 5796. Each variant produces 34 to 51 distinct errors and 0 distinct warnings.

Will not fit

  • Will not fiterror · FrameRear axle mismatch: Frame is SuperBoost 157x12 but Rear wheel hub is Boost 148x12. On 21 of the 258 verified frames in this catalog. Applies to all 3 variants.
  • Will not fiterror · FrameRear axle mismatch: Frame is 135x5-qr but Rear wheel hub is Boost 148x12. On 5 of the 258 verified frames in this catalog. Applies to all 3 variants.
  • Will not fiterror · FrameRear axle mismatch: Frame is 10x135 bolt-on but Rear wheel hub is Boost 148x12. On 2 of the 258 verified frames in this catalog. Applies to all 3 variants.
  • Will not fiterror · FrameRear axle mismatch: Frame is 150x12 (DH, pre-Boost) but Rear wheel hub is Boost 148x12. On 2 of the 258 verified frames in this catalog. Applies to all 3 variants.

Freehub, Cassette. 120 more findings from the same check, on up to 1 of the 60 verified cassettes each.

Open a variant in the builder to see the ones that apply to your own parts.

Worth knowing

    Rear rotor interface unstated, Rear Rotor. 531 more findings from the same check, on up to 1 of the 177 verified rotors each.

    Open a variant in the builder to see the ones that apply to your own parts.

    The checker compares the dimensions listed in what we check, and what we don’t. “No conflicts found” means no conflict among those dimensions — not a guarantee that a build works. Errors mean it won’t fit; warnings mean it works but check; infos are notes.
    Funn Fantom Hub, rear (Shimano HG)
    Photo: Funn

    $189.00 MSRP·334 g

    What the maker states

    Freehub
    / driver Shimano HG (on 1 of 3 variants); / driver Shimano Micro Spline (on 1 of 3 variants); / driver SRAM XD (on 1 of 3 variants)
    Hub
    Spacing Boost 148x12

    A value shown as a set or a range differs between this model’s variants and is never one variant’s spec.

    3 verified variants

    VariantFreehubPrice (MSRP)WeightSourceLast checkedBuild
    Fantom Hub, rear (Shimano HG)/ driver Shimano HG$189.00334 gmaker’s page2026-09-04Build with this
    Fantom Hub, rear (Shimano Micro Spline)/ driver Shimano Micro Spline$189.00334 gmaker’s page2026-09-04Build with this
    Fantom Hub, rear (SRAM XD)/ driver SRAM XD$189.00334 gmaker’s page2026-09-04Build with this
    The rest of what the maker states2 not published

    2 further fields the checker looks for are not published by Funn, so we leave them blank rather than estimate them, and those 2 checks stay silent on this rear hub. They are rotor mount and maximum system weight. Each is recorded as “not stated by the maker (not checked)”.

    Source: each variant links the maker’s own page in the table above. Last checked 2026-09-04.

    Checked against

    The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.

    6 of 1879 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.

    Where this sits

    All Funn rear hubsOpen a variant in the builder to see the ones that apply to your own parts