TRP TR29 140mm Front Rotor
What the checker says439will not fit5check before you buy32worth knowing
Run variant by variant through the mountain bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.
Checked against 5997 verified mountain bike parts in this catalog. 5443 produced no finding of any kind.
Will not fit
- Will not fiterror · Front WheelFront rotor: a 6-bolt rotor does not mount on a Center Lock front hub as it is - the two use different rotor interfaces. The part that bridges them is a Center Lock adapter, and the ones makers publish fit one-piece rotors only. A shim or adapter may make other sizes or standards work, but that is a modification, not a fit. On 61 of the 270 verified front wheels in this catalog.
- Will not fiterror · Front HubFront rotor: a 6-bolt rotor does not mount on a Center Lock front hub as it is - the two use different rotor interfaces. The part that bridges them is a Center Lock adapter, and the ones makers publish fit one-piece rotors only. A shim or adapter may make other sizes or standards work, but that is a modification, not a fit. On 16 of the 40 verified front hubs in this catalog.
- Will not fiterror · ForkFront rotor too small: 140mm is below the Manitou R7 Pro 100 minimum of 160mm (its native mount size). Post-mount adapters only space the caliper up, so no adapter can make a smaller rotor fit. On 2 of the 490 verified forks in this catalog.
- Will not fiterror · ForkFront rotor too small: 140mm is below the Manitou R7 Pro 120 minimum of 160mm (its native mount size). Post-mount adapters only space the caliper up, so no adapter can make a smaller rotor fit. On 2 of the 490 verified forks in this catalog.
- Will not fiterror · ForkFront rotor too small: 140mm is below the RockShox 35 Gold RL minimum of 180mm (its native mount size). Post-mount adapters only space the caliper up, so no adapter can make a smaller rotor fit. On 2 of the 490 verified forks in this catalog.
Front rotor min, Fork. 433 more findings from the same check, on up to 1 of the 490 verified forks each.
Front brake rotor excluded, Front Brake. 1 more finding from the same check, on up to 1 of the 92 verified brakes each.
Open a variant in the builder to see the ones that apply to your own parts.
Check before you buy
- Check before you buywarning · Front BrakeFront rotor thickness: Magura Louise Elite is designed for 2.0mm rotors and this rotor is 1.8mm - check the brake maker's rotor-thickness spec before buying. On 1 of the 92 verified brakes in this catalog.
- Check before you buywarning · Front BrakeFront rotor thickness: TRP DH-R EVO is designed for 2.3mm rotors and this rotor is 1.8mm - check the brake maker's rotor-thickness spec before buying. On 1 of the 92 verified brakes in this catalog.
- Check before you buywarning · Front BrakeFront rotor thickness: TRP EVO Pro is designed for 2.3mm rotors and this rotor is 1.8mm - check the brake maker's rotor-thickness spec before buying. On 1 of the 92 verified brakes in this catalog.
- Check before you buywarning · Front BrakeFront rotor thickness: TRP Slate EVO is designed for 2.3mm rotors and this rotor is 1.8mm - check the brake maker's rotor-thickness spec before buying. On 1 of the 92 verified brakes in this catalog.
- Check before you buywarning · Front BrakeFront rotor thickness: TRP Trail EVO is designed for 2.3mm rotors and this rotor is 1.8mm - check the brake maker's rotor-thickness spec before buying. On 1 of the 92 verified brakes in this catalog.
Worth knowing
Front rotor interface unstated, Front Wheel. 29 more findings from the same check, on up to 1 of the 270 verified front wheels each.
Front rotor interface unstated, Front Hub. 3 more findings from the same check, on up to 1 of the 40 verified front hubs each.
Open a variant in the builder to see the ones that apply to your own parts.
$39.99 MSRP·105 g
What the maker states
- Size
- 140 mm rotor
- Mount
- 6-bolt
- Thickness
- 1.8 mm
Source
Source: the maker’s page. Last checked 2026-09-08.
Checked against
The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.
- 5DEV R-SPEC Trail/Enduro Cranks (Crankset) No conflicts found
- 9point8 Fall Line (Dropper Post) No conflicts found
- 9point8 Stout (31.8, 30mm) (Stem) No conflicts found
- ACID SLX 30 front (Front Wheel) Will not fit
- ACID SLX 30 rear (Rear Wheel) No conflicts found
- Acros ZS44/ZS56 (Headset) No conflicts found
6 of 1861 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.