Manitou Mara Pro Inline Rear Shock
What the checker says182will not fit20check before you buy10worth knowing
Run variant by variant through the mountain bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.
Checked against 5149 verified mountain bike parts in this catalog. 4906 produced no finding of any kind; that is Mara Pro Inline XC (190x45 Eyelet). Mara Pro Inline (210x52.5 Eyelet) clears 4898. Each variant produces 86 to 97 distinct errors and 10 distinct warnings.
Will not fit
- Will not fiterror · FrameShock mount mismatch: Frame uses a Trunnion shock but Shock is Standard eyelet. On 88 of the 258 verified frames in this catalog. Applies to all 2 variants.
- Will not fiterror · FrameShock size mismatch: Frame needs 210x55mm but Shock is 190x45mm. On 29 of the 258 verified frames in this catalog. Applies to 1 of 2 variants.
- Will not fiterror · FrameShock size mismatch: Frame needs 230x65mm but Shock is 190x45mm. On 25 of the 258 verified frames in this catalog. Applies to 1 of 2 variants.
- Will not fiterror · FrameShock size mismatch: Frame needs 230x65mm but Shock is 210x52.5mm. On 25 of the 258 verified frames in this catalog. Applies to 1 of 2 variants.
- Will not fiterror · FrameShock size mismatch: Frame needs 205x65mm but Shock is 190x45mm. On 22 of the 258 verified frames in this catalog. Applies to 1 of 2 variants.
- Will not fiterror · FrameShock size mismatch: Frame needs 205x65mm but Shock is 210x52.5mm. On 22 of the 258 verified frames in this catalog. Applies to 1 of 2 variants.
- Will not fiterror · FrameShock size mismatch: Frame needs 185x55mm but Shock is 190x45mm. On 20 of the 258 verified frames in this catalog. Applies to 1 of 2 variants.
- Will not fiterror · FrameShock size mismatch: Frame needs 185x55mm but Shock is 210x52.5mm. On 20 of the 258 verified frames in this catalog. Applies to 1 of 2 variants.
Hardtail shock, Frame. 112 more findings from the same check, on up to 1 of the 258 verified frames each.
Shock size, Frame. 42 more findings from the same check, on up to 15 of the 258 verified frames each.
Shock stroke over, Frame. 12 more findings from the same check, on up to 1 of the 258 verified frames each.
Shock stroke short, Frame. 8 more findings from the same check, on up to 8 of the 258 verified frames each.
Open a variant in the builder to see the ones that apply to your own parts.
Check before you buy
Package only, Frame. 20 more findings from the same check, on up to 1 of the 258 verified frames each.
Open a variant in the builder to see the ones that apply to your own parts.
Worth knowing
Bundled shock, Frame. 10 more findings from the same check, on up to 1 of the 258 verified frames each.
Open a variant in the builder to see the ones that apply to your own parts.
$449.99 MSRP·275 g
What the maker states
- Eye
- Eye-to-eye 190 mm (on 1 of 2 variants); Eye-to-eye 210 mm (on 1 of 2 variants)
- Stroke
- 45 mm (on 1 of 2 variants); 52.5 mm (on 1 of 2 variants)
- Mount
- Standard eyelet
- Spring
- air spring
A value shown as a set or a range differs between this model’s variants and is never one variant’s spec.
2 verified variants
| Variant | Eye | Stroke | Price (MSRP) | Weight | Source | Last checked | Build |
|---|---|---|---|---|---|---|---|
| Mara Pro Inline (210x52.5 Eyelet) | Eye-to-eye 210 mm | 52.5 mm | $449.99 | 275 g | maker’s page | 2026-09-08 | Build with this |
| Mara Pro Inline XC (190x45 Eyelet) | Eye-to-eye 190 mm | 45 mm | $449.99 | 275 g | maker’s page | 2026-09-08 | Build with this |
The rest of what the maker states1 not published
1 further field the checker looks for is not published by Manitou, so we leave it blank rather than estimate it, and that check stays silent on this rear shock. It is oem only. Each is recorded as “not stated by the maker (not checked)”.
Source: each variant links the maker’s own page in the table above. Last checked 2026-09-08.
Checked against
The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.
- 5DEV R-SPEC Trail/Enduro Cranks (Crankset) No conflicts found
- 9point8 Fall Line (Dropper Post) No conflicts found
- 9point8 Stout (31.8, 30mm) (Stem) No conflicts found
- ACID SLX 30 front (Front Wheel) No conflicts found
- ACID SLX 30 rear (Rear Wheel) No conflicts found
- Acros ZS44/ZS56 (Headset) No conflicts found
6 of 1859 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.