BuildMyMTB
Prototype - Evolving Daily

TwinWorks CNC Stem Stem

What the checker says2will not fit

Run variant by variant through the mountain bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.

Checked against 5922 verified mountain bike parts in this catalog. 5774 produced no finding of any kind. Each variant produces 2 distinct errors and 0 distinct warnings.

Will not fit

  • Will not fiterror · HandlebarBar/stem clamp mismatch: a 31.8mm bar does not clamp in a 35mm stem - the clamp diameters differ. A shim or adapter may make other sizes or standards work, but that is a modification, not a fit. On 147 of the 270 verified handlebars in this catalog. Applies to all 2 variants.
  • Will not fiterror · HandlebarBar/stem clamp mismatch: a 25.4mm bar does not clamp in a 35mm stem - the clamp diameters differ. A shim or adapter may make other sizes or standards work, but that is a modification, not a fit. On 1 of the 270 verified handlebars in this catalog. Applies to all 2 variants.
The checker compares the dimensions listed in what we check, and what we don’t. “No conflicts found” means no conflict among those dimensions — not a guarantee that a build works. Errors mean it won’t fit; warnings mean it works but check; infos are notes.

$91.00 MSRP·108 to 138 g

What the maker states

Clamp
Bar clamp 35 mm
Length
35 mm (on 1 of 2 variants); 50 mm (on 1 of 2 variants)

A value shown as a set or a range differs between this model’s variants and is never one variant’s spec.

2 verified variants

VariantLengthPrice (MSRP)WeightSourceLast checkedBuild
CNC Stem 35mm35 mm$91.00108 gmaker’s page2026-07-28Build with this
CNC Stem 50mm50 mm$91.00138 gmaker’s page2026-07-28Build with this
Source

Source: each variant links the maker’s own page in the table above. Last checked 2026-07-28.

Checked against

The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.

6 of 1776 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.

Where this sits

All TwinWorks stemsOpen a variant in the builder to see the ones that apply to your own parts